Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › 2011.10–2015.04
RM19V0EQ _56 Audio / Visual / Telematics _014599 AUDIO / VIDEO _0074081 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter  


DESCRIPTION

The No. 1 stereo jack adapter assembly sends the sound signal from an external device to the radio and display receiver assembly via this circuit.

The sound signal that has been sent is amplified by the radio and display receiver assembly and then is sent to the speakers.

If there is an open or short in the circuit, sound cannot be heard from the speakers even if there is no malfunction in the radio and display receiver assembly or speakers.

WIRING DIAGRAM

E229861E46
0.813,0.823 1.24,0.979 0.427,0.156 10 false AUXO 0.896,1.281 1.24,1.438 0.344,0.156 10 false ARO 0.938,1.75 1.271,1.906 0.333,0.156 10 false ALO 0.813,2.24 1.24,2.396 0.427,0.156 10 false ASGN 0.813,2.708 1.24,2.865 0.427,0.156 10 false AGND 2.5,2.844 3.156,3 0.656,0.156 10 false (Shielded) 4.031,2.844 4.688,3 0.656,0.156 10 false (Shielded) 5.927,0.813 6.354,0.969 0.427,0.156 10 false ADPG 5.927,1.271 6.354,1.427 0.427,0.156 10 false VAR+ 5.677,0.688 5.854,0.844 0.177,0.156 10 false 25 5.677,1.177 5.854,1.333 0.177,0.156 10 false 26 5.677,1.646 5.854,1.802 0.177,0.156 10 false 28 5.677,2.125 5.854,2.281 0.177,0.156 10 false 27 5.677,2.604 5.854,2.76 0.177,0.156 10 false 11 1.323,0.688 1.5,0.844 0.177,0.156 10 false 9 1.323,1.167 1.5,1.323 0.177,0.156 10 false 6 1.323,1.646 1.5,1.802 0.177,0.156 10 false 7 1.323,2.115 1.5,2.271 0.177,0.156 10 false 8 1.323,2.604 1.5,2.76 0.177,0.156 10 false 10 0.427,3.135 0.719,3.292 0.292,0.156 10 false I146 0.427,3.281 1.667,3.677 1.24,0.396 10 false No. 1 Stereo Jack Adapter Assembly 5.656,3.281 6.875,3.771 1.219,0.49 10 false Radio and Display Receiver Assembly 5.927,1.75 6.354,1.906 0.427,0.156 10 false VAL+ 5.927,2.219 6.354,2.375 0.427,0.156 10 false VA- 5.927,2.719 6.354,2.875 0.427,0.156 10 false AGND 5.646,3.125 5.969,3.281 0.323,0.156 10 false I155

PROCEDURE

1.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
a.

Disconnect the radio and display receiver assembly connector.


b.

Disconnect the No. 1 stereo jack adapter assembly connector.


c.
E227392C06
1.5,0.219 1.958,0.5 0.458,0.281 1.5,2.271 1.958,2.552 0.458,0.281 2.115,1.417 2.781,1.177 false 2.219,1.635 2.073,1.958 false 2.115,1.635 1.594,1.958 false 2.448,1.635 2.969,1.958 false 2.333,1.635 2.479,1.958 false 1.583,3.875 1.177,4.229 false 1.875,3.875 2.271,4.229 false 2.052,3.833 2.5,3.833 false 1.406,3.833 0.885,3.833 false 1.729,3.875 1.729,4.417 false 2.823,1.083 3.427,1.375 0.604,0.292 10 false AGND 1.813,1.979 2.51,2.292 0.698,0.313 10 false VAR+ 1.177,1.979 1.865,2.229 0.688,0.25 10 false ADPG 2.896,1.979 3.406,2.219 0.51,0.24 10 false VAL+ 2.417,1.979 2.958,2.354 0.542,0.375 10 false VA- 0.177,0.167 0.802,0.604 0.625,0.438 10 false *a 1.604,0.281 2.188,0.646 0.583,0.365 10 false I155 2.531,3.76 3.219,4.177 0.688,0.417 10 false AGND 0.927,4.26 1.458,4.583 0.531,0.323 10 false ALO 2.156,4.26 3.021,4.667 0.865,0.406 10 false AUXO 0.177,2.229 1.063,2.688 0.885,0.458 10 false *b 0.542,3.76 1.208,4.094 0.667,0.333 10 false ARO 1.49,4.427 2.104,4.667 0.615,0.24 10 false ASGN 1.594,2.323 2.229,2.708 0.635,0.385 10 false I146
*a Front view of wire harness connector
(to Radio and Display Receiver Assembly)
*b Front view of wire harness connector
(to No. 1 Stereo Jack Adapter Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
I155-25 (ADPG) - I146-9 (AUXO) Always Below 1 Ω
I155-11 (AGND) - I146-10 (AGND) Always Below 1 Ω
I155-26 (VAR+) - I146-6 (ARO) Always Below 1 Ω
I155-28 (VAL+) - I146-7 (ALO) Always Below 1 Ω
I155-27 (VA-) - I146-8 (ASGN) Always Below 1 Ω
I155-25 (ADPG) - Body ground Always 10 kΩ or higher
I155-11 (AGND) - Body ground Always 10 kΩ or higher
I155-26 (VAR+) - Body ground Always 10 kΩ or higher
I155-28 (VAL+) - Body ground Always 10 kΩ or higher
I155-27 (VA-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR