1. PRECAUTION
When installing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.
2.INSTALL HARD DISK DRIVE
Insert the hard disk drive in the direction shown by the arrow in the illustration to install it.
Engage the 2 guides to temporarily install the cover.
Install the cover with the 2 screws.
86212C
3.INSTALL NO. 2 RADIO RECEIVER BRACKET
4.INSTALL NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY
55660
5.INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
6.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
58804A
7.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
58916
8.INSTALL BOX BOTTOM MAT
9.INSTALL REAR CONSOLE BOX ASSEMBLY
10.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
11.INSPECT HARD DISK DRIVE