Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › CLEARANCE SONAR MAIN SWITCH
RM19V0EQ _56 Audio / Visual / Telematics _014601 PARK ASSIST / MONITORING _0074091 CLEARANCE SONAR MAIN SWITCH A

PARK ASSIST / MONITORING  CLEARANCE SONAR MAIN SWITCH  INSTALLATION  


PROCEDURE

Hide 84490A 1.INSTALL BACK SONAR OR CLEARANCE SONAR SWITCH ASSEMBLY

a.

Engage the 2 claws to install the back sonar or clearance sonar switch assembly.


Hide 55410C 2.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 55650 3.INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55474C 4.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for LHD)

Hide 55431B 5.INSTALL UPPER INSTRUMENT PANEL FINISH PANEL (for RHD)

Hide 62312B 7.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP

Hide 8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for RHD)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION