Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR MAIN SWITCH
RM19V0EQ _56 Audio / Visual / Telematics _014601 PARK ASSIST / MONITORING _0074092 BLIND SPOT MONITOR MAIN SWITCH A

PARK ASSIST / MONITORING  BLIND SPOT MONITOR MAIN SWITCH  INSTALLATION  


PROCEDURE

Hide 84470 1.INSTALL BLIND SPOT MONITOR MAIN SWITCH ASSEMBLY (WARNING CANCELING SWITCH ASSEMBLY)

a.

Engage the 2 claws to install the blind spot monitor main switch assembly (warning canceling switch assembly).


Hide 55446A 2.INSTALL NO. 1 SWITCH HOLE BASE

a.

Connect the connector.


b.
E234564

Engage the 4 claws and 2 guides to install the No. 1 switch hole base.


c.

Remove the protective tape from the panel.