Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Smart Entry and Start System)
RM19V0EQ _58 Vehicle Interior _014605 DOOR LOCK _0074107 WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Smart Entry and Start System) U

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Smart Entry and Start System)  TERMINALS OF ECU  


CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)


B278841
2.302,3.771 2.625,3.979 0.323,0.208 5.625,5.01 5.948,5.219 0.323,0.208 6.302,2.094 6.625,2.302 0.323,0.208 2.01,1.875 2.333,2.083 0.323,0.208 2.021,1.521 2.344,1.729 0.323,0.208 0.313,2.063 0.635,2.271 0.323,0.208 0.24,2.51 0.563,2.719 0.323,0.208 0.24,2.75 0.563,2.958 0.323,0.208 0.313,1.438 0.635,1.646 0.323,0.208 6.302,1.49 6.625,1.698 0.323,0.208 3.979,5.031 4.302,5.24 0.323,0.208 1.198,5.01 1.521,5.219 0.323,0.208 1.854,6.292 2.177,6.5 0.323,0.208 5.01,6.292 5.333,6.5 0.323,0.208 3.5,7.531 3.823,7.74 0.323,0.208 4.76,3.771 5.083,3.979 0.323,0.208 6.146,5.01 6.469,5.219 0.323,0.208 4.25,0.74 4.573,0.948 0.323,0.208 4.125,1.125 4.125,0.844 4.125,0.844 4.24,0.844 false 6.052,1.594 6.302,1.594 false 6.052,2.198 6.302,2.198 false 1.667,1.969 2.01,1.969 false 1.677,1.615 2.01,1.615 false 0.635,2.167 0.865,2.167 false 0.75,2.74 1.031,2.74 false 0.625,1.542 0.865,1.542 false 1.698,0.958 1.927,0.688 1.927,0.688 2.135,0.688 false 1.469,3.063 1.469,1.677 1.469,1.677 1.563,1.677 false 1.479,2.104 1.563,2.104 false 3.552,7.552 3.979,7.823 0.427,0.271 10 false MB 5.708,5.031 6.104,5.313 0.396,0.281 10 false 3E 1.271,5.031 1.656,5.313 0.385,0.281 10 false 3C 1.938,6.313 2.375,6.646 0.438,0.333 10 false 3B 5.083,6.313 5.427,6.573 0.344,0.26 10 false 3A 4.052,5.052 4.365,5.385 0.313,0.333 10 false 3D 4.833,3.792 5.198,4.094 0.365,0.302 10 false I13 2.385,3.792 2.813,4.094 0.427,0.302 10 false I12 6.365,2.115 6.656,2.344 0.292,0.229 10 false 3A 2.083,1.896 2.49,2.188 0.406,0.292 10 false I12 2.104,1.542 2.521,1.813 0.417,0.271 10 false I13 0.385,2.083 0.781,2.375 0.396,0.292 10 false 3D 0.323,2.531 0.656,2.74 0.333,0.208 10 false 3E 0.625,2.542 0.969,2.833 0.344,0.292 10 false *B 0.323,2.771 0.729,3.063 0.406,0.292 10 false 3F 0.625,2.781 1.052,3.125 0.427,0.344 10 false *C 0.385,1.458 0.74,1.708 0.354,0.25 10 false 3C 6.385,1.51 6.698,1.75 0.313,0.24 10 false 3B 5.969,5.042 6.323,5.323 0.354,0.281 10 false *B 6.229,5.031 6.563,5.333 0.333,0.302 10 false 3F 6.51,5.042 6.771,5.25 0.26,0.208 10 false *C 4.313,0.76 4.677,1.01 0.365,0.25 10 false MB 0.24,0.177 0.677,0.5 0.438,0.323 10 false *A 1.406,3.104 1.656,3.313 0.25,0.208 10 false *2 2.188,0.625 2.438,0.833 0.25,0.208 10 false *1
*A Main body ECU (multiplex network body ECU) with 2 connectors *B for LHD
*C for RHD - -
*1 Main body ECU (multiplex network body ECU) *2 2 connectors


B282096
2.302,3.771 2.625,3.979 0.323,0.208 5.625,5.01 5.948,5.219 0.323,0.208 6.302,2.094 6.625,2.302 0.323,0.208 2.156,2.01 2.479,2.219 0.323,0.208 2.156,1.625 2.479,1.833 0.323,0.208 0.313,2.063 0.635,2.271 0.323,0.208 0.24,2.51 0.563,2.719 0.323,0.208 0.24,2.75 0.563,2.958 0.323,0.208 0.313,1.438 0.635,1.646 0.323,0.208 6.313,1.542 6.635,1.75 0.323,0.208 3.979,5.031 4.302,5.24 0.323,0.208 1.198,5.01 1.521,5.219 0.323,0.208 1.854,6.292 2.177,6.5 0.323,0.208 5.01,6.292 5.333,6.5 0.323,0.208 3.5,7.531 3.823,7.74 0.323,0.208 4.76,3.771 5.083,3.979 0.323,0.208 6.146,5.01 6.469,5.219 0.323,0.208 4.208,0.75 4.531,0.958 0.323,0.208 4.083,1.125 4.083,0.844 4.083,0.844 4.198,0.844 false 6.052,1.635 6.302,1.635 false 6.052,2.198 6.302,2.198 false 1.823,2.104 2.146,2.104 false 1.823,1.729 2.146,1.729 false 0.635,2.167 0.865,2.167 false 0.74,2.75 1.031,2.75 false 0.625,1.531 0.865,1.531 false 1.854,0.979 2.083,0.708 2.083,0.708 2.292,0.708 false 1.583,3.083 1.583,1.479 1.583,1.479 1.688,1.479 false 1.583,1.844 1.677,1.844 false 1.583,2.188 1.688,2.188 false 3.552,7.552 4.042,7.823 0.49,0.271 10 false MB 5.708,5.031 5.896,5.167 0.188,0.135 10 false 3E 1.271,5.031 1.469,5.167 0.198,0.135 10 false 3C 1.938,6.313 2.135,6.448 0.198,0.135 10 false 3B 5.083,6.313 5.271,6.448 0.188,0.135 10 false 3A 4.052,5.052 4.323,5.188 0.271,0.135 10 false 3D 4.833,3.802 5.24,4.083 0.406,0.281 10 false I13 2.375,3.802 2.677,3.99 0.302,0.188 10 false I12 6.385,2.125 6.646,2.313 0.26,0.188 10 false 3A 2.229,2.042 2.688,2.333 0.458,0.292 10 false I12 2.229,1.656 2.583,1.917 0.354,0.26 10 false I13 0.385,2.094 0.802,2.396 0.417,0.302 10 false 3D 0.313,2.542 0.698,2.792 0.385,0.25 10 false 3E 0.625,2.542 0.865,2.708 0.24,0.167 10 false *B 0.313,2.781 0.719,3.01 0.406,0.229 10 false 3F 0.625,2.802 0.865,2.969 0.24,0.167 10 false *C 0.385,1.458 0.76,1.719 0.375,0.26 10 false 3C 6.396,1.573 6.635,1.781 0.24,0.208 10 false 3B 5.969,5.042 6.229,5.271 0.26,0.229 10 false *B 6.229,5.031 6.417,5.167 0.188,0.135 10 false 3F 6.5,5.042 6.823,5.25 0.323,0.208 10 false *C 4.271,0.781 4.635,1.021 0.365,0.24 10 false MB 0.25,0.188 0.5,0.396 0.25,0.208 10 false *A 2.344,0.646 2.688,0.948 0.344,0.302 10 false *1 1.5,3.125 1.75,3.333 0.25,0.208 10 false *2
*A Main body ECU (multiplex network body ECU) with 3 connectors *B for LHD
*C for RHD - -
*1 Main body ECU (multiplex network body ECU) *2 3 connectors


a.

Disconnect the MB, I12 and I13 main body ECU (multiplex network body ECU) connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connectors disconnected.


Tester Connection Wiring Color Terminal Description Condition Specified Condition
MB-11 (GND1) - Body ground - Ground Always Below 1 Ω
I12-3 (GND2) - Body ground W-B - Body ground Ground Always Below 1 Ω
MB-30 (BECU) - Body ground - Battery power supply Always 11 to 14 V
MB-29 (ACC) - Body ground - ACC power supply Ignition switch ACC 11 to 14 V
MB-29 (ACC) - Body ground - ACC power supply Ignition switch off Below 1 V
MB-31 (ALTB) - Body ground - Battery power supply Always 11 to 14 V
MB-32 (IG) - Body ground - IG power supply Ignition switch ON 11 to 14 V
MB-32 (IG) - Body ground - IG power supply Ignition switch off Below 1 V
I13-17 (KSW) - Body ground G - Body ground Unlock warning switch signal No key in ignition key cylinder 10 kΩ or higher
I13-17 (KSW) - Body ground G - Body ground Unlock warning switch signal Key in ignition key cylinder Below 1 Ω

If the result is not as specified, there may be a malfunction in the wire harness.


c.

Reconnect the MB, I12 and I13 main body ECU (multiplex network body ECU) connector.


d.

Measure the voltage according to the value(s) in the table below.

Tester Connection Wiring Color Terminal Description Condition Specified Condition
3B-8 (ACT-) - Body ground V - Body ground*1
GR - Body ground*2
Door lock motor unlock drive output (except driver door) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
3B-8 (ACT-) - Body ground V - Body ground*1
GR - Body ground*2
Door lock motor unlock drive output (except driver door) Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked 11 to 14 V
3B-3 (ACT+) - Body ground W - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
3B-3 (ACT+) - Body ground W - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder locked 11 to 14 V
3B-4 (ACTD) - Body ground GR - Body ground*1
V - Body ground*2
Driver door lock motor unlock drive output Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
3B-4 (ACTD) - Body ground GR - Body ground*1
V - Body ground*2
Driver door lock motor unlock drive output Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked 11 to 14 V
3C-15 (FLCY) - Body ground L - Body ground Front door LH courtesy light switch input Front door LH open Below 1 V
3C-15 (FLCY) - Body ground L - Body ground Front door LH courtesy light switch input Front door LH closed Pulse generation
I13-19 (FRCY) - Body ground Y - Body ground Front door RH courtesy light switch input Front door RH open Below 1 V
I13-19 (FRCY) - Body ground Y - Body ground Front door RH courtesy light switch input Front door RH closed 11 to 14 V*3
Pulse generation*4
I13-1 (LCTY) - Body ground LG - Body ground Rear door LH courtesy light switch input Rear door LH open Below 1 V
I13-1 (LCTY) - Body ground LG - Body ground Rear door LH courtesy light switch input Rear door LH closed 11 to 14 V*5
Pulse generation*6
I13-6 (RCTY) - Body ground B - Body ground Rear door RH courtesy light switch input Rear door RH open Below 1 V
I13-6 (RCTY) - Body ground B - Body ground Rear door RH courtesy light switch input Rear door RH closed Pulse generation
I13-7 (LSFL) - Body ground V - Body ground Front door LH unlock detection switch input Front door LH unlocked Below 1 V
I13-7 (LSFL) - Body ground V - Body ground Front door LH unlock detection switch input Front door LH locked Pulse generation
I13-18 (LSFR) - Body ground W - Body ground Front door RH unlock detection switch input Front door RH unlocked Below 1 V
I13-18 (LSFR) - Body ground W - Body ground Front door RH unlock detection switch input Front door RH locked Pulse generation
3A-53 (LSR) - Body ground Y - Body ground Rear door RH unlock detection switch input Rear door RH or LH unlocked Below 1 V
3A-53 (LSR) - Body ground Y - Body ground Rear door RH unlock detection switch input Ignition switch off, all doors closed, rear door RH and LH locked Pulse generation
3C-17 (LSR) - Body ground LG - Body ground Rear door LH unlock detection switch input Rear door LH or RH unlocked Below 1 V
3C-17 (LSR) - Body ground LG - Body ground Rear door LH unlock detection switch input Ignition switch off, all doors closed, rear door LH and RH locked Pulse generation
3D-22 (BZR) - Body ground BE - Body ground Wireless door lock buzzer signal Wireless door lock buzzer off Below 1 V
3D-22 (BZR) - Body ground BE - Body ground Wireless door lock buzzer signal Wireless door lock buzzer on Pulse generation
I13-4 (PRG) - Body ground P - Body ground Signal output to door control receiver Key inserted in ignition key cylinder → key pulled out of ignition key cylinder 11 to 14 V → Pulse generation → 11 to 14 V
I13-16 (RDA) - Body ground L - Body ground Signal input from door control receiver Ignition switch off, all doors closed and door control transmitter module sub-assembly switch not pressed 11 to 14 V
Ignition switch off, all doors closed and door control transmitter module sub-assembly switch pressed Pulse generation
I13-17 (KSW) - Body ground G - Body ground Key unlock warning switch input No key in ignition key cylinder Pulse generation
I13-17 (KSW) - Body ground G - Body ground Key unlock warning switch input Key in ignition key cylinder Below 1 V

·

*1: for LHD

·

*2: for RHD

·

*3: w/ Seat Position Memory System

·

*4: w/o Seat Position Memory System

·

*5: w/o Rear Sunshade System

·

*6: w/ Rear Sunshade System


If the result is not as specified, the main body ECU (multiplex network body ECU) or instrument panel junction block assembly may have a malfunction.



CHECK DOOR CONTROL RECEIVER


B280754
3.444,0.244 3.771,0.429 0.327,0.185 3.469,0.264 3.76,0.411 0.291,0.147 10 O24

a.

Disconnect the O24 door control receiver connector.


b.

Measure the resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connectors disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
O24-5 (+B) - Body ground W - Body ground Battery (power supply) Always 11 to 14 V
O24-1 (GND) - Body ground BR - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction in the wire harness.



c.

Reconnect the O24 door control receiver connector.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
O24-3 (PRG) - O24-1 (GND) P - BR Signal input from main body ECU (multiplex network body ECU) Key inserted in ignition key cylinder → key pulled out of ignition key cylinder 11 to 14 V → Pulse generation → 11 to 14 V
O24-2 (RDA) - O24-1 (GND) L - BR Signal output to main body ECU (multiplex network body ECU) Ignition switch off, all doors closed and door control transmitter module sub-assembly switch not pressed 11 to 14 V
Ignition switch off, all doors closed and door control transmitter module sub-assembly switch pressed Pulse generation

If the result is not as specified, the door control receiver may have a malfunction.