84820
1.INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
Check the operation of the power window regulator master switch assembly (for LHD)
| *a | Component without harness connected
(Power Window Regulator Master Switch Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 2 (L) - 1 (E) | Lock switch pushed | Below 1 Ω |
| 2 (L) - 1 (E) | off | 10 kΩ or higher |
| 9 (UL) - 1 (E) | Unlock switch pushed | Below 1 Ω |
| 9 (UL) - 1 (E) | off | 10 kΩ or higher |
If the result is not as specified, replace the power window regulator master switch assembly.
Check the operation of the power window regulator master switch assembly (for RHD)
| *a | Component without harness connected
(Power Window Regulator Master Switch Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 2 (L) - 9 (E) | Lock switch pushed | Below 1 Ω |
| 2 (L) - 9 (E) | off | 10 kΩ or higher |
| 8 (UL) - 9 (E) | Unlock switch pushed | Below 1 Ω |
| 8 (UL) - 9 (E) | off | 10 kΩ or higher |
If the result is not as specified, replace the power window regulator master switch assembly.