Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM(w/o Smart Entry and Start System)
RM19V0EQ _58 Vehicle Interior _014606 THEFT DETERRENT / KEYLESS ENTRY _0074131 ENGINE IMMOBILISER SYSTEM(w/o Smart Entry and Start System) L

THEFT DETERRENT / KEYLESS ENTRY  ENGINE IMMOBILISER SYSTEM(w/o Smart Entry and Start System)  PRECAUTION  


PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL


NOTICE:

When disconnecting the cable from the negative (-) battery terminal, initialize the following system after the cable is reconnected.

System Name See Procedure
Parking Assist Monitor System (Click here)



PRECAUTIONS WHEN USING INTELLIGENT TESTER


a.

When using the intelligent tester to troubleshoot the engine immobiliser system:

Connect the intelligent tester to the DLC3 while the ignition switch is off, and turn a door courtesy light switch on and off at 1.5-second intervals until communication between the intelligent tester and vehicle begins.



PRECAUTIONS FOR THE KEY


a.

The key is a precision instrument. Be sure to observe the following:

i.

Do not drop or strike the key.


ii.

Do not allow the key to be kept in a high temperature place for a long time.


iii.

Do not use an ultrasonic washing machine to clean the key.


iv.

Keep the key away from magnets or magnetized items during use.


v.

Do not attach any stickers to the key.




PRECAUTION FOR REGISTRATION


a.

If replacing any of the following parts, refer to the Service Bulletin.

NOTICE:

Any keys or ECUs for which registration has been performed cannot be reused.


i.

Key


ii.

Transponder key ECU assembly


iii.

ECM