Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM
RM19V0EQ _58 Vehicle Interior _014607 LIGHTING (INT) _0074132 LIGHTING SYSTEM L

LIGHTING (INT)  LIGHTING SYSTEM  PRECAUTION  


PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL


NOTICE:

When disconnecting the cable from the negative (-) battery terminal, initialize the following system after the cable is reconnected.


System See Procedure
Parking Assist Monitor System (Click here)


IGNITION SWITCH EXPRESSIONS


a.

The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch (Position) Engine Switch (Condition)
Ignition Switch off LOCK Off
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START Start



PRECAUTIONS WHEN USING INTELLIGENT TESTER


a.

When using the intelligent tester with the ignition switch off to troubleshoot:

Connect the intelligent tester to the vehicle, and turn the courtesy light switch on and off at 1.5-second intervals until communication between the intelligent tester and the vehicle begins.


b.

After all DTCs are cleared, check if the trouble occurs again 6 seconds after the ignition switch is turned to ON.