81240
1.INSTALL NO. 1 ROOM LIGHT ASSEMBLY (w/o Sliding Roof)
| *a | Switch Part of Room Light Switch Base |
| *b | Switch Part of No. 1 Room Light Housing |
Align the switch parts shown in the illustration and engage the 4 claws to install the room light switch base to the No. 1 room light housing.
| *a | Front |
Engage the 4 claws to install the No. 1 room light housing.
| *a | Front |
Engage the 4 claws to install the No. 1 room light lens.
81360U
2.INSTALL SPOT LIGHT BULB (w/ Sliding Roof)
Install the 2 spot light bulbs to the 2 spot light sockets.
Turn the 2 spot light sockets with the 2 spot light bulbs in the direction indicated by the arrows in the illustration and install them as a unit.
81360T
3.INSTALL SPOT LIGHT ASSEMBLY (w/ Sliding Roof)
Connect the connector.
| *a | Front |
Engage the 4 claws to install the spot light assembly.