Home › Vehicle Interior › LIGHTING (INT) › ROOM LIGHT
RM19V0EQ _58 Vehicle Interior _014607 LIGHTING (INT) _0074135 ROOM LIGHT A

LIGHTING (INT)  ROOM LIGHT  REMOVAL  


PROCEDURE

Hide 81240 1.REMOVE NO. 1 ROOM LIGHT ASSEMBLY (w/o Sliding Roof)

a.
E234059
2,0.885 0.979,0.885 false 0.813,0.792 0.969,0.948 0.156,0.156 10 false *1 1.771,0.021 1.927,0.177 0.156,0.156 10 false *a
*1 Protective Tape
*a Front


Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws and remove the No. 1 room light lens.


b.
E234060
1.334,1.724 1.086,1.217 false 1.28,1.744 1.437,1.905 0.157,0.161 10 *1 2.381,0.296 2.538,0.456 0.157,0.161 10 *a
*1 Protective Tape
*a Front


Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws as shown in the illustration and remove the No. 1 room light housing.


c.
E220648
1.473,0.872 1.779,0.566 false 1.795,0.47 1.979,0.638 0.184,0.168 10 *1
*1 Room Light Switch Base


Using a screwdriver, disengage the 4 claws and disconnect the room light switch base from the No. 1 room light housing.


Hide 81360T 2.REMOVE SPOT LIGHT ASSEMBLY (w/ Sliding Roof)

a.
E234063
0.71,0.426 0.883,0.588 0.174,0.162 10 *a
*a Front


Using a moulding remover, disengage the 4 claws.


b.

Disconnect the connector and remove the spot light assembly.


Hide 81360U 3.REMOVE SPOT LIGHT BULB (w/ Sliding Roof)

a.
E234065

Turn the 2 spot light sockets with the 2 spot light bulbs in the direction indicated by the arrows in the illustration and remove them as a unit.


b.

Remove the 2 spot light bulbs from the 2 spot light sockets.