64610
1.INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY
Check the operation of the door lock motor.
| *a | Component without harness connected:
(Luggage Compartment Door Lock Assembly) |
| *b | Close (Lock) |
| *c | Open (Unlock) |
Move the door lock to the close (lock) position.
Apply battery voltage to the door lock motor and check operation of the door lock motor.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 1 (B)
Battery negative (-) → 2 (E) |
Luggage compartment door lock motor open (unlock) operation |
If the result is not as specified, replace the luggage compartment door lock assembly.
Check the operation of the door courtesy switch.
| *a | Component without harness connected:
(Luggage Compartment Door Lock Assembly) |
| *b | Close (Lock) |
| *c | Open (Unlock) |
Measure the resistance according to the value(s) in the table below.
| Measurement Condition | Door Lock Condition | Specified Condition |
|---|---|---|
| 2 (E) - 3 (D+) | Close (Lock) | 10 kΩ or higher |
| 2 (E) - 3 (D+) | Open (Unlock) | Below 1 Ω |
If the result is not as specified, replace the luggage compartment door lock assembly.