Home › Vehicle Interior › MIRROR (INT) › INNER REAR VIEW MIRROR › 2011.10–2015.04
RM19V0EQ _58 Vehicle Interior _014609 MIRROR (INT) _0074147 INNER REAR VIEW MIRROR A

MIRROR (INT)  INNER REAR VIEW MIRROR  INSTALLATION  


PROCEDURE

Hide 87810 1.INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)

a.

for Type A:

i.
B287085
0.667,0.979 0.417,0.979 false 0.24,0.896 0.51,1.146 0.271,0.25 10 false *1
*1 Lock Lever


Slide the inner rear view mirror assembly in the direction indicated by the arrow in the illustration to install it.

NOTICE:

Confirm that the lock lever is surely installed.



ii.

Engage the 2 claws to install the inner mirror base cover.



b.

for Type B:

i.
B314471

Slide the inner rear view mirror assembly in the direction indicated by the arrow shown in the illustration.


ii.

Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.

Torque:
1.0 N*m (10 kgf*cm, 9 in.*lbf)



Hide 87810 2.INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)

a.

w/o Automatic High Beam System:

i.

Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.

Torque:
1.8 N*m (18 kgf*cm, 16 in.*lbf)


ii.

Connect the connector.



b.

w/ Automatic High Beam System:

NOTICE:
·

Do not touch the camera lens (built into the inner rear view mirror assembly) with a bare hand.

·

Do not allow anything to adhere to the camera lens (built into the inner rear view mirror assembly).

·

Do not apply strong impacts to the inner rear view mirror assembly.

·

Do not allow any liquid to get on the inner rear view mirror assembly.



i.

Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.

Torque:
1.8 N*m (18 kgf*cm, 16 in.*lbf)


ii.

Connect the connector.



Hide 87834 3.INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)

a.

w/o Automatic High Beam System:

i.

Engage the 6 claws.


ii.
B294032

Slide the inner rear view mirror stay holder cover and engage the 2 claws to install the cover as shown in the illustration.



b.

w/ Automatic High Beam System:

i.

Engage the 2 claws.


ii.
B294055

Slide the inner rear view mirror stay holder cover and engage the 2 claws to install the cover as shown in the illustration.