Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM(w/ VSC)
RM19V0EQ _58 Vehicle Interior _014610 SUPPLEMENTAL RESTRAINT SYSTEMS _0074148 AIRBAG SYSTEM(w/ VSC) D

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM(w/ VSC)  CHECK MODE PROCEDURE  


CHECK MODE (SIGNAL CHECK): DTC CHECK


a.

Turn the ignition switch off.


b.

Connect the intelligent tester to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the intelligent tester on.


e.

Enter the following menus: Body / SRS Airbag / Utility / Signal Check, and proceed with checking using the intelligent tester.

Body Electrical > SRS Airbag > Utility
Tester Display
Signal Check
50005 188 3
NOTICE:

Select Signal Check screen on the intelligent tester to clear the output DTCs (both current and history).


HINT:
·

DTCs can be detected more sensitively in check mode than in normal diagnosis mode.

·

Perform check mode inspection when a malfunction in a squib circuit is suspected even after the normal system code is output through normal diagnosis mode inspection.