Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT PASSENGER AIRBAG ASSEMBLY › 2011.10–2016.05
RM19V0EQ _58 Vehicle Interior _014610 SUPPLEMENTAL RESTRAINT SYSTEMS _0074152 FRONT PASSENGER AIRBAG ASSEMBLY A

SUPPLEMENTAL RESTRAINT SYSTEMS  FRONT PASSENGER AIRBAG ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 82142A 1.INSTALL NO. 2 INSTRUMENT PANEL WIRE

a.
B296285C01
2.448,2.521 2.188,2.26 2.188,2.26 1.885,2.26 false 2,0.656 1.729,0.396 1.729,0.396 1.573,0.396 false 1.417,0.313 1.656,0.531 0.24,0.219 10 false *1 1.74,2.177 1.979,2.417 0.24,0.24 10 false *2
*1 Airbag Connector
*2 Airbag Connector Lock


Connect the airbag connector of the No. 2 instrument panel wire to the instrument panel passenger airbag assembly.

NOTICE:

When connecting any airbag connector, take care not to damage the airbag wire harness.



b.

Push in the lock to install the airbag connector to the instrument panel passenger airbag assembly.


c.

Engage the clamp.


Hide 73960A 2.INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

NOTICE:

If the hooks are not engaged in the correct order, the deployment part of the instrument panel passenger airbag assembly may be damaged.


a.
B296282

Engage the 3 hooks as shown in the illustration.


b.

Push the instrument panel passenger airbag assembly to engage the 3 hooks.


c.

Install the 2 screws to install the instrument panel passenger airbag assembly.


Hide 3.INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY

Hide 82142A 4.CONNECT NO. 2 INSTRUMENT PANEL WIRE

a.

Check that the ignition switch is off.


b.

Check that the cable is disconnected from the negative (-) battery terminal.

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.



c.
B288992

Connect the connector.

NOTICE:

When connecting any airbag connector, take care not to damage the airbag wire harness.



Hide 55011A 5.INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY