Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › REAR AIRBAG SENSOR
RM19V0EQ _58 Vehicle Interior _014610 SUPPLEMENTAL RESTRAINT SYSTEMS _0074157 REAR AIRBAG SENSOR G

SUPPLEMENTAL RESTRAINT SYSTEMS  REAR AIRBAG SENSOR  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Be sure to correctly follow the removal and installation procedures for the side No. 2 airbag sensor assemblies.


PROCEDURE

Hide 89860C 1.INSPECT SIDE NO. 2 AIRBAG SENSOR ASSEMBLY (for Vehicle not Involved in Collision)

Hide 89860C 2.INSPECT SIDE NO. 2 AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)


b.

Visually check the side No. 2 airbag sensor assemblies for defects if a quarter panel of the vehicle or the area around a quarter panel is damaged.

HINT:

The defects are as follows:

·

Cracks on the sensor housing

·

Dents on the sensor housing

·

Chips on the sensor housing

·

Cracks or other damage to the connector

·

Damage to the serial number



OK:

No defects are found.


If any of the defects is found, replace the side No. 2 airbag sensor assembly with a new one.


Hide 89860C 3.INSPECT SIDE NO. 2 AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag is Deployed)

a.

When airbags have deployed as the result of a collision, be sure to replace all side No. 2 airbag sensor assemblies in the damaged areas (anywhere in need of repair).


b.

Visually check the side No. 2 airbag sensor assemblies in undamaged areas for defects.

HINT:

The defects are as follows:

·

Cracks on the sensor housing

·

Dents on the sensor housing

·

Chips on the sensor housing

·

Cracks or other damage to the connector

·

Damage to the serial number



OK:

No defects are found.


If any of the defects is found or a side No. 2 airbag sensor assembly has detected a major collision, replace the side No. 2 airbag sensor assembly with a new one.