Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM(w/o VSC) › 2011.10–2016.05
RM19V0EQ _58 Vehicle Interior _014610 SUPPLEMENTAL RESTRAINT SYSTEMS _0074159 AIRBAG SYSTEM(w/o VSC) D

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM(w/o VSC)  SYSTEM DESCRIPTION  


GENERAL


a.

Deceleration sensors used for the airbag system are installed on various parts on the vehicle and calculate the deceleration rate of each part during a collision.


b.

Depending on the situation, the airbag sensor assembly sends a deployment signal to each airbag based on the information from each sensor.



DEPLOYMENT CONDITION


a.

FRONTAL COLLISION

C247159E14
0.323,1.125 1.885,1.5 1.563,0.375 10 false Airbag Sensor Assembly 0.438,2.448 1.802,2.844 1.365,0.396 10 false Front Airbag Sensors 2.615,1.792 3.031,2.26 0.417,0.469 10 false AND 4.135,0.448 6.729,0.823 2.594,0.375 10 false Horn Button Assembly (Driver Side Squib) 3.99,1.563 6.844,2.198 2.854,0.635 10 false Instrument Panel Passenger Airbag Assembly (Front Passenger Side Squib) 4.24,2.896 6.698,3.51 2.458,0.615 10 false Front Seat Outer Belt Assembly LH/RH (Front Pretensioner Squib LH/RH)

i.

Frontal collision signals are produced based on the information from the airbag sensor assembly and front airbag sensors.

HINT:

In case of a frontal collision, the SRS ignition signal could be output with the deceleration sensor ON signal even without a signal from the front airbag sensors.



ii.

Frontal collision signals are used to deploy the airbags and pretensioners in the illustration.