Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY(for Fold Down Seat Type)
RM19V0EQ _58 Vehicle Interior _014611 SEAT _0074163 REAR SEAT ASSEMBLY(for Fold Down Seat Type) A

SEAT  REAR SEAT ASSEMBLY(for Fold Down Seat Type)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR SEATBACK ASSEMBLY LH

a.

Place the rear seatback assembly LH in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.

Install the rear seatback assembly LH with the 2 bolts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


c.
B294047
0.824,1.108 1.06,1.309 0.236,0.201 10 *1 0.482,1.067 0.806,1.189 false
*1 Fastener


Engage the fastener as shown in the illustration.


d.

Raise the rear seatback assembly LH.


e.

Pass the rear seat inner with center belt assembly LH through the rear seat center shoulder belt guide.


Hide 2.INSTALL REAR SEATBACK ASSEMBLY RH

a.

Place the rear seatback assembly RH in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.

Install the rear seatback assembly RH with the 2 bolts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


c.
B294048
1.106,1.322 1.342,1.524 0.236,0.201 10 *1 0.765,1.281 1.089,1.404 false
*1 Fastener


Engage the fastener as shown in the illustration.


d.

Raise the rear seatback assembly RH.


Hide 3.INSTALL REAR SIDE SEATBACK ASSEMBLY LH

a.

Place the rear side seatback assembly LH in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.

Engage the hook to install the rear side seatback assembly LH with the bolt.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


c.

Pass the rear seat outer belt through the rear seat shoulder belt guide LH.


Hide 4.INSTALL REAR SIDE SEATBACK ASSEMBLY RH

a.

Place the rear side seatback assembly RH in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.

Engage the hook to install the rear side seatback assembly RH with the bolt.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


c.

Pass the rear seat outer belt through the rear seat shoulder belt guide RH.


Hide 72693 5.INSTALL REAR SEAT CUSHION LOCK HOOK

a.
B280246

Engage the claw to install a new rear seat cushion lock hook.

NOTICE:

Rear seat cushion lock hooks must not be reused.


HINT:

The illustration is for the RH side. The LH side is the opposite of the RH side.



Hide 6.INSTALL REAR SEAT CUSHION ASSEMBLY

a.

Place the rear seat cushion assembly in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.
B281559

Engage the 2 hooks of the rear seat cushion assembly to the vehicle body as shown in the illustration.


c.

Confirm that the rear seat cushion assembly is firmly installed.

NOTICE:

When installing the rear seat cushion assembly, make sure that the seat belt buckles are not under the rear seat cushion assembly.