73344
1.REMOVE REAR SEAT SHOULDER BELT GUIDE LH
Remove the 2 screws.
Disengage the guide and remove the rear seat shoulder belt guide LH from the rear side seatback pad with frame LH.
73343
2.REMOVE REAR SEAT SHOULDER BELT GUIDE RH
Remove the 2 screws.
Disengage the guide and remove the rear seat shoulder belt guide RH from the rear side seatback pad with frame RH.
73345
3.REMOVE REAR SEAT CENTER SHOULDER BELT GUIDE
Remove the 2 screws.
Disengage the guide and remove the rear seat center shoulder belt guide from the rear seatback assembly LH.
72667
4.REMOVE REAR SEATBACK UPPER LOCK BEZEL (for LH Side)
Disengage the 4 claws and remove the rear seatback upper lock bezel.
5.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)
Disengage the 2 hooks.
Remove the 6 hog rings.
Disengage the 2 hooks.
Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly LH.
71078S
6.REMOVE SEPARATE TYPE REAR SEATBACK COVER (for LH Side)
Remove the 8 hog rings and separate type rear seatback cover from the separate type rear seatback pad.
72848A
7.REMOVE NO. 1 SEAT ARMREST COVER
Using a screwdriver with its tip wrapped with protective tape, disengage the 3 claws and remove the No. 1 seat armrest cover.
72830
8.REMOVE REAR CENTER SEAT ARMREST ASSEMBLY
Remove the bolt and washer.
Remove the guide and rear center seat armrest assembly.
Disengage the 2 claws and remove the bush.
71349C
9.REMOVE REAR SEATBACK HINGE COVER
Remove the rear seatback hinge cover as shown in the illustration.
72806B
10.REMOVE REAR CENTER SEAT ARMREST CUP HOLDER SUB-ASSEMBLY
Disengage the 2 guides and 2 claws, and remove the rear center seat armrest cup holder sub-assembly.
72667
11.REMOVE REAR SEATBACK UPPER LOCK BEZEL (for RH Side)
Disengage the 4 claws and remove the rear seatback upper lock bezel.
12.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)
Disengage the 2 hooks.
Remove the 7 hog rings.
Disengage the 2 hooks.
Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly RH.
71077S
13.REMOVE SEPARATE TYPE REAR SEATBACK COVER (for RH Side)
Remove the 7 hog rings.
Remove the 10 hog rings and separate type rear seatback cover from the separate type rear seatback pad.
71075B
14.REMOVE BENCH TYPE REAR SEAT CUSHION COVER
Remove the 41 hog rings.
Remove the 24 hog rings and bench type rear seat cushion cover from the bench type rear seat cushion pad.