Home › Vehicle Interior › SEAT › SEAT MEMORY SWITCH
RM19V0EQ _58 Vehicle Interior _014611 SEAT _0074167 SEAT MEMORY SWITCH G

SEAT  SEAT MEMORY SWITCH  INSPECTION  


PROCEDURE

Hide 84927 1.INSPECT SEAT MEMORY SWITCH

a.
B293836
1.052,1.146 1.052,1.375 false 1.5,1.146 1.5,1.375 false 1.938,1.146 1.938,1.375 false 0.302,1.948 0.531,2.156 0.229,0.208 10 false *a 0.958,1.406 1.177,1.625 0.219,0.219 10 false *1 1.406,1.406 1.615,1.604 0.208,0.198 10 false *2 1.854,1.406 2.031,1.615 0.177,0.208 10 false *3
*1 M1 Switch
*2 M2 Switch
*3 SET Switch
*a Component without harness connected
(Seat Memory Switch)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
2 - 1 SET switch is pressed Below 1 Ω
4 - 1 M1 switch is pressed Below 1 Ω
3 - 1 M2 switch is pressed Below 1 Ω
2 - 1 SET switch is not pressed 10 kΩ or higher
4 - 1 M1 switch is not pressed 10 kΩ or higher
3 - 1 M2 switch is not pressed 10 kΩ or higher


If the result is not as specified, replace the seat memory switch.