Home › Vehicle Interior › SEAT › LUMBAR SUPPORT ADJUSTER ASSEMBLY
RM19V0EQ _58 Vehicle Interior _014611 SEAT _0074169 LUMBAR SUPPORT ADJUSTER ASSEMBLY G

SEAT  LUMBAR SUPPORT ADJUSTER ASSEMBLY  INSPECTION  


PROCEDURE

Hide 72750D 1.INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY

a.
B161051
0.115,0.073 0.323,0.24 0.208,0.167 10 false *a
*a Component without harness connected
(Lumbar Support Adjuster Assembly)


Check the operation of the lumbar support adjuster assembly.

i.

Check that the front seatback moves smoothly when the battery is connected to the lumbar support adjuster assembly connector terminals.

OK:
Measurement Condition Operational Direction
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Seatback moves forward
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Seatback moves backward


If the result is not as specified, replace the lumbar support adjuster assembly.