Perform the same procedure as for the LH side.
1.REMOVE FRONT SEAT ASSEMBLY RH
84921B
2.REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
84921A
3.REMOVE RECLINING POWER SEAT SWITCH KNOB
71074S
4.DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER
71867A
5.REMOVE NO. 1 FRONT SEAT INNER CUSHION SHIELD RH
71811D
6.REMOVE FRONT SEAT CUSHION SHIELD RH
Disengage the 4 claws, 7 guides and clip to remove the front seat cushion shield RH.
| *1 | Wire Harness Cover |
Disengage the 2 claws and open the wire harness cover.
Remove the wire harness from the wire harness cover.
Disengage the 2 wire harness clamps.
Disconnect the 2 connectors from the position control ECU and switch assembly.
Disconnect the front lumbar power seat switch connector.
84070
7.REMOVE POSITION CONTROL ECU AND SWITCH ASSEMBLY
Remove the 3 screws and position control ECU and switch assembly from the front seat cushion shield RH.