Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY(for Fixed Seat Type)
RM19V0EQ _58 Vehicle Interior _014611 SEAT _0074171 REAR SEAT ASSEMBLY(for Fixed Seat Type) A

SEAT  REAR SEAT ASSEMBLY(for Fixed Seat Type)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR SEATBACK ASSEMBLY

a.

Place the rear seatback assembly in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.
B293561

Engage the 3 hooks as shown in the illustration.


c.

Install the rear seatback assembly with the 4 bolts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


d.

Pass each rear seat outer belt through the rear seat shoulder belt guide RH, rear seat shoulder belt guide LH and rear seat center shoulder belt guide.


Hide 72693 2.INSTALL REAR SEAT CUSHION LOCK HOOK

a.
B280246

Engage the claw to install a new rear seat cushion lock hook.

NOTICE:

Rear seat cushion lock hooks must not be reused.


HINT:

The illustration is for the RH side. The LH side is the opposite of the RH side.



Hide 3.INSTALL REAR SEAT CUSHION ASSEMBLY

a.

Place the rear seat cushion assembly in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.
B298859

Engage the 2 hooks of the rear seat cushion assembly to the vehicle body as shown in the illustration.


c.

Confirm that the rear seat cushion assembly is firmly installed.

NOTICE:

When installing the rear seat cushion assembly, make sure that the seat belt buckles are not under the rear seat cushion assembly.