1.REMOVE REAR SEAT CUSHION ASSEMBLY
Disengage the hook of the rear seat cushion assembly from the vehicle body as shown in the illustration.
| a | 100 mm (3.94 in.) or less |
Follow the instructions below carefully as the cushion frame can be deformed easily.
Choose a hook to disengage first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to disengage the hook.
Repeat the step above for the other hook.
Remove the rear seat cushion assembly.
Be careful not to damage the vehicle body.
72693
2.REMOVE REAR SEAT CUSHION LOCK HOOK
Disengage the claw and remove the rear seat cushion lock hook as shown in the illustration.
Rear seat cushion lock hooks must not be reused.
The illustration is for the RH side. The LH side is the opposite of the RH side.
3.REMOVE REAR SEATBACK ASSEMBLY
Disconnect each rear seat outer belt from the rear seat shoulder belt guide RH, rear seat shoulder belt guide LH and rear seat center shoulder belt guide.
Remove the 4 bolts.
Disengage the 3 hooks and remove the rear seatback assembly as shown in the illustration.