71075B
1.INSTALL BENCH TYPE REAR SEAT CUSHION COVER
Temporarily install the bench type rear seat cushion cover to the bench type rear seat cushion pad.
Using hog ring pliers, install 24 new hog rings.
Be careful not to damage the cover.
When installing the hog rings, take care to minimize wrinkles as much as possible.
Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 41 new hog rings.
Be careful not to damage the cover.
When installing the hog rings, take care to minimize wrinkles as much as possible.
71077B
2.INSTALL BENCH TYPE REAR SEATBACK COVER
Temporarily install the bench type rear seatback cover to the bench type rear seatback pad.
Using hog ring pliers, install 26 new hog rings.
Using hog ring pliers, install the bench type rear seatback cover to the seatback pad with 35 new hog rings.
Be careful not to damage the cover.
When installing the hog rings, take care to minimize wrinkles as much as possible.
73344
3.INSTALL REAR SEAT SHOULDER BELT GUIDE LH
Engage the guide.
Install the rear seat shoulder belt guide LH with the 2 screws.
73343
4.INSTALL REAR SEAT SHOULDER BELT GUIDE RH
Engage the guide.
Install the rear seat shoulder belt guide RH with the 2 screws.
73345
5.INSTALL REAR SEAT CENTER SHOULDER BELT GUIDE
Engage the guide.
Install the rear seat center shoulder belt guide with the 2 screws.