Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING UNIT
RM19V0EQ _58 Vehicle Interior _014613 HEATING / AIR CONDITIONING _0074181 AIR CONDITIONING UNIT A

HEATING / AIR CONDITIONING  AIR CONDITIONING UNIT  DISASSEMBLY  


PROCEDURE

Hide 87201 1.REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY

a.
E227191

Disengage the 2 claws and guide, and remove the No. 1 air duct sub-assembly as shown in the illustration.


Hide 55840C 2.REMOVE NO. 6 HEATER TO REGISTER DUCT ASSEMBLY

a.
E227193

Disengage the 2 claws and 2 guides, and remove the No. 6 heater to register duct assembly as shown in the illustration.


Hide 88669A 3.REMOVE COOLER THERMISTOR HOSE (for Automatic Air Conditioning System)

a.
E234890

Disengage the clamp and remove the cooler thermistor hose.


Hide 88897P 4.REMOVE ASPIRATOR

a.
E227232

Disengage the 2 claws and remove the aspirator.


Hide 82210K 5.REMOVE AIR CONDITIONING HARNESS ASSEMBLY (for Manual Air Conditioning System)

a.
E227195

Remove the heater packing as shown in the illustration.


b.
E227197

Disconnect the 4 connectors.


c.

Disengage the 5 clamps and remove the air conditioning harness assembly.


Hide 82210K 6.REMOVE AIR CONDITIONING HARNESS ASSEMBLY (for Automatic Air Conditioning System)

a.
E227195

Remove the heater packing as shown in the illustration.


b.
E228262

Disconnect the 5 connectors.


c.

Disengage the 5 clamps and remove the air conditioning harness assembly.


Hide 88515 7.REMOVE COOLER EXPANSION VALVE

a.
E227206

Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and cooler expansion valve.


Hide 8.REMOVE BLOWER ASSEMBLY WITH COOLER EVAPORATOR SUB-ASSEMBLY

Hide 10.REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

a.
E227204

Remove the No. 1 cooler evaporator sub-assembly from the blower assembly as shown in the illustration.


b.
C129881

Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.


Hide 87050D 11.REMOVE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)

a.
E174812

Remove the 2 screws and No. 2 air conditioning radiator damper servo sub-assembly.


Hide 87107A 12.REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY

a.
E227200

Disengage the 3 claws and remove the heater clamp.


b.
E227201

Remove the screw and clamp.


c.
E227202

Remove the heater radiator unit sub-assembly from the air conditioning radiator assembly as shown in the illustration.

NOTICE:

Prepare a drain pan or cloth in case the cooling water leaks.



Hide 87050C 13.REMOVE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

a.
E227877

Remove the 3 screws and then the No. 1 air conditioning radiator damper servo sub-assembly.