87103B
1.INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY
Install the blower motor with fan sub-assembly with the 3 screws.
87130K
2.INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY
Install the No. 1 blower damper servo sub-assembly with the 3 screws.
87139C
3.INSTALL CLEAN AIR FILTER
Install the clean air filter as shown in the illustration.
88899M
4.INSTALL AIR FILTER COVER PLATE
Engage the 2 claws to install the air filter cover plate.
87201A
5.INSTALL AIR DUCT SUB-ASSEMBLY
Engage the 4 claws to install the air duct sub-assembly.
88539J
6.INSTALL DRAIN COOLER HOSE
| *1 | Hose Notch |
| *2 | Blower Case Assembly Rib |
Align the hose notch and blower case assembly rib as shown in the illustration and install the drain cooler hose.
88501
7.INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
88625
8.INSTALL NO. 1 COOLER THERMISTOR
88515
9.INSTALL COOLER EXPANSION VALVE