88310
1.INSPECT COMPRESSOR ASSEMBLY WITH PULLEY (COMPRESSOR SOLENOID)
| *a | Component without harness connected
(Compressor Assembly with Pulley (Compressor Solenoid)) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| E74-1 (SOL-) - E74-2 (SOL+) | 20°C (68°F) | 10 to 11 Ω |
If the resistance is not as specified, replace the compressor assembly with pulley.