Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER
RM19V0EQ _58 Vehicle Interior _014613 HEATING / AIR CONDITIONING _0074190 CONDENSER A

HEATING / AIR CONDITIONING  CONDENSER  REASSEMBLY  


PROCEDURE

Hide 88474 1.INSTALL COOLER DRYER

a.
E226859

Using pliers, install a new cooler dryer to the modulator.


b.
E101932

Apply a sufficient amount of compressor oil to a new O-ring and the fitting surfaces of the cap.

Compressor oil:

ND-OIL 8 or equivalent



c.
E226858
1.646,1.292 1.229,1.292 false 1.052,1.188 1.344,1.438 0.292,0.25 10 false *1
*1 14 mm Straight Hexagon Wrench


Using a 14 mm straight hexagon wrench, install the cap to the modulator.

Torque:
2.9 N*m (30 kgf*cm, 26 in.*lbf)

NOTICE:
·

Keep the O-ring and O-ring fitting surfaces free from dirt or foreign matter.

·

Do not use any compressor oil other than ND-OIL 8 or equivalent.