58871
1.INSTALL CONSOLE BOX CUSHION (for Automatic Transaxle)
Engage the 2 claws to install the console box cushion.
Use the same procedure for the other console box cushions.
2.INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY (for Automatic Transaxle)
| *a | Stopper |
Slide the console compartment door sub-assembly as shown in the illustration to engage the 2 guides and 2 stoppers and install the console compartment door sub-assembly.
58959B
3.INSTALL CONSOLE COMPARTMENT DOOR CUSHION (for Automatic Transaxle)
Install the 4 console compartment door cushions to the console compartment door lock sub-assembly.
58959B
4.INSTALL CONSOLE COMPARTMENT DOOR CUSHION (for Manual Transaxle)
Install the 2 console compartment door cushions to the console compartment door lock sub-assembly.
5.INSTALL CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY (for Automatic Transaxle)
Engage the 2 guides as shown in the illustration.
Engage the 8 claws to temporarily install the console compartment door lock sub-assembly.
Install the console compartment door lock sub-assembly with the 2 screws.
6.INSTALL CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY (for Manual Transaxle)
Engage the 2 guides as shown in the illustration.
Engage the 6 claws to temporarily install the console compartment door lock sub-assembly.
Install the console compartment door lock sub-assembly with the 2 screws.
58903A
7.INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY
Engage the 4 claws and 4 clips to install the console rear end panel sub-assembly.