Home › Vehicle Exterior › DOOR / HATCH › HOOD SUPPORT
RM19V0EQ _59 Vehicle Exterior _014618 DOOR / HATCH _0074221 HOOD SUPPORT N

DOOR / HATCH  HOOD SUPPORT  DISPOSAL  


PROCEDURE

Hide 53450A 1.DISPOSE OF HOOD SUPPORT ASSEMBLY

a.

Horizontally hold the hood support in a vise with the piston-rod pulled out.


b.
B127037
1.898,1.371 2.022,1.518 0.124,0.147 10 A 2.949,1.364 3.077,1.521 0.128,0.157 10 B

Wear safety glasses. Gradually cut a part between A and B shown in the illustration using a metal saw to release the gas.

Area Measurement
A-B 100 mm (3.94 in.)

NOTICE:

Although the gas inside the hood support is colorless, odorless and harmless, there is a possibility that metal debris could scatter. Therefore, cover it with a piece of cloth or other material.