Home › Vehicle Exterior › MIRROR (EXT) › POWER MIRROR CONTROL SYSTEM(w/ Memory)
RM19V0EQ _59 Vehicle Exterior _014619 MIRROR (EXT) _0074232 POWER MIRROR CONTROL SYSTEM(w/ Memory) L

MIRROR (EXT)  POWER MIRROR CONTROL SYSTEM(w/ Memory)  PRECAUTION  


PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL


NOTICE:

When disconnecting the cable from the negative (-) battery terminal, initialize the following system after the cable is reconnected.


System Name See Procedure
Parking Assist Monitor System (Click here)


PRECAUTIONS WHEN USING INTELLIGENT TESTER


a.

When using the intelligent tester with the engine switch off to troubleshoot:

Connect the intelligent tester to the vehicle, and turn a courtesy light switch on and off at 1.5-second intervals until communication between the intelligent tester and the vehicle begins.


b.

After all DTCs are cleared, check if the trouble occurs again 6 seconds after the engine switch is turned on (IG).