Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER MOTOR
RM19V0EQ _59 Vehicle Exterior _014620 WIPER / WASHER _0074240 FRONT WIPER MOTOR G

WIPER / WASHER  FRONT WIPER MOTOR  INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Ensure that fingers or articles of clothing do not get caught in moving parts when performing this test.


PROCEDURE

Hide 85110 1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)

E144461
1.5,1.188 2.01,1.51 0.51,0.323 1.583,2.51 1.208,2.823 false 1.083,1.802 1.427,2.094 false 1.927,2.51 2.219,2.802 false 0.958,2.781 1.323,3.052 0.365,0.271 10 +1 2.281,2.781 2.667,3.042 0.385,0.26 10 E 0.906,1.635 1.25,1.906 0.344,0.271 10 +2 0.25,0.188 0.656,0.531 0.406,0.344 10 *a 1.625,1.25 2.094,1.552 0.469,0.302 10 A29
*a Component without harness connected
(Windshield Wiper Motor Assembly)


a.

Check low speed operation.

i.

Connect a battery positive (+) lead to terminal A29-5 (+1) and a negative (-) lead to terminal A29-4 (E), and check that the motor operates at low speed.

OK:

Motor operates at low speed.




b.

Check high speed operation.

i.

Connect a battery positive (+) lead to terminal A29-3 (+2) and a negative (-) lead to terminal A29-4 (E), and check that the motor operates at high speed.

OK:

Motor operates at high speed.


If the result is not as specified, replace the windshield wiper motor assembly.



Hide 85110 2.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)

E144461
2.031,2.156 2.504,2.152 false 1.541,2.509 1.288,2.874 false 1.863,2.513 2.224,2.874 false 2.547,2.07 2.769,2.22 0.222,0.149 10 +1 2.139,2.898 2.343,3.048 0.205,0.149 10 +2 1.211,2.893 1.354,3.043 0.142,0.149 10 E 0.347,0.3 0.569,0.449 0.222,0.149 10 *a 1.602,1.365 1.917,1.529 0.315,0.164 10 A29 1.484,1.298 2.008,1.588 0.525,0.291
*a Component without harness connected
(Windshield Wiper Motor Assembly)


a.

Check low speed operation.

i.

Connect a battery positive (+) lead to terminal A29-1 (+1) and a negative (-) lead to terminal A29-5 (E), and check that the motor operates at low speed.

OK:

Motor operates at low speed.




b.

Check high speed operation.

i.

Connect a battery positive (+) lead to terminal A29-4 (+2) and a negative (-) lead to terminal A29-5 (E), and check that the motor operates at high speed.

OK:

Motor operates at high speed.


If the result is not as specified, replace the windshield wiper motor assembly.