Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER MOTOR
RM19V0EQ _59 Vehicle Exterior _014620 WIPER / WASHER _0074240 FRONT WIPER MOTOR G

WIPER / WASHER  FRONT WIPER MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85110 1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)

a.

for RH Side:

i.
E226089
1.031,0.875 1.031,1.135 false 0.531,0.427 0.885,0.677 0.354,0.25 10 A 0.542,0.896 0.938,1.177 0.396,0.281 10 A 0.958,1.156 1.344,1.448 0.385,0.292 10 *1
*1 Ceramic Dot


Check the stop (park) position.


ii.

Operate the windshield wiper motor assembly.


iii.

Stop the windshield wiper motor assembly operation.


iv.

Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


OK:

The front wiper stops at the position shown in the illustration.

Area Measurement
A 7.5mm (0.295 in.)




b.

for LH Side:

i.
E226090
1.25,1.052 1.25,1.563 false 0.74,1.208 1.208,1.51 0.469,0.302 10 A 0.708,0.729 1.052,0.99 0.344,0.26 10 A 1.177,1.573 1.573,1.823 0.396,0.25 10 *1
*1 Ceramic Dot


Operate the windshield wiper motor assembly.


ii.

Stop the windshield wiper motor assembly operation.


iii.

Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


OK:

The front wiper stops at the position shown in the illustration.

Area Measurement
A 7.5mm (0.295 in.)




Hide 85110 2.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)

a.

for LH Side:

i.
E230006
2.714,0.369 2.852,0.544 0.138,0.175 10 A 2.263,1.057 2.443,1.232 0.179,0.175 10 *1 2.355,0.819 2.358,1.057 false 2.714,0.867 2.852,1.042 0.138,0.175 10 A
*1 Ceramic Dot


Check the stop (park) position.


ii.

Operate the windshield wiper motor assembly.


iii.

Stop the windshield wiper motor assembly operation.


iv.

Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


OK:

The front wiper stops at the position shown in the illustration.

Area Measurement
A 7.5mm (0.295 in.)




b.

for RH Side:

i.
E230007
2.583,0.707 2.739,0.863 0.156,0.156 10 A 2.09,1.261 2.247,1.418 0.156,0.156 10 *1 2.188,1.021 2.182,1.244 false 2.565,1.171 2.722,1.327 0.156,0.156 10 A
*1 Ceramic Dot


Check the stop (park) position.


ii.

Operate the windshield wiper motor assembly.


iii.

Stop the windshield wiper motor assembly operation.


iv.

Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


OK:

The front wiper stops at the position shown in the illustration.

Area Measurement
A 7.5mm (0.295 in.)