Home › Vehicle Exterior › WIPER / WASHER › WIPER SWITCH
RM19V0EQ _59 Vehicle Exterior _014620 WIPER / WASHER _0074242 WIPER SWITCH A

WIPER / WASHER  WIPER SWITCH  INSTALLATION  


PROCEDURE

Hide 84650 1.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

a.
E227467

Engage the claw to install the windshield wiper switch assembly as shown in the illustration.


b.

Connect each connector.


Hide 45286B 2.INSTALL UPPER STEERING COLUMN COVER

a.

Engage the 2 claws to install the upper steering column cover.


b.

Engage the 4 clips and 2 guides to install the instrument cluster finish panel to the upper steering column cover.


Hide 45287 3.INSTALL LOWER STEERING COLUMN COVER

NOTICE:

If the lower steering column cover is installed in the incorrect order, it will not be possible to assemble the steering column cover.


a.

Engage the 2 claws.


b.
E235568

Engage the 2 claws.

HINT:

Press the area around the claws to engage them.



c.

Turn the steering wheel assembly to the left and install the screw.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


d.

Turn the steering wheel assembly to the right and install the lower steering column cover with the screw.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)