Home › Vehicle Exterior › HORN › HORN
RM19V0EQ _59 Vehicle Exterior _014622 HORN _0074264 HORN G

HORN  HORN  INSPECTION  


PROCEDURE

Hide 86510 1.INSPECT HIGH PITCHED HORN ASSEMBLY (for 2-piece Type)

a.
E226259
2.042,1.385 2.188,1.729 false 0.104,0.021 0.448,0.323 0.344,0.302 10 false *a 2.01,1.75 2.469,1.938 0.458,0.188 10 false A4-1
*a Component without harness connected
(High Pitched Horn Assembly)


Apply battery voltage and check the operation of the horn according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal A4-1
Battery negative (-) → Body ground
Horn sounds


If the result is not as specified, replace the high pitched horn assembly.


Hide 86520 2.INSPECT LOW PITCHED HORN ASSEMBLY

a.
E226259
2.042,1.385 2.188,1.729 false 0.104,0.021 0.438,0.333 0.333,0.313 10 false *a 2.01,1.75 2.469,1.938 0.458,0.188 10 false A4-1
*a Component without harness connected
(Low Pitched Horn Assembly)


Apply battery voltage and check the operation of the horn according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal A1-1
Battery negative (-) → Body ground
Horn sounds


If the result is not as specified, replace the high pitched horn assembly.