Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › 2011.10–2015.04
RM19V0EQ _59 Vehicle Exterior _014623 EXTERIOR PANELS / TRIM _0074268 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR BUMPER ASSEMBLY

a.

w/ TOYOTA Parking Assist-sensor System:

i.

Connect the connector.



b.
B280045

Engage the 6 claws.


c.
B280043

Engage the 7 claws and install the rear bumper assembly as shown in the illustration.

HINT:

Use the same procedure for the RH side and LH side.



d.

Install the 10 screws.


e.

Install the 2 clips.


Hide 52164A 2.INSTALL REAR BUMPER PLATE LH

a.
B280038
0.365,2.99 0.583,3.198 false 0.188,2.865 0.438,3.115 0.25,0.25 10 *1
*1 Hook


Engage the hook.


b.

Engage the 2 claws to install the rear bumper plate LH.


Hide 52163A 3.INSTALL REAR BUMPER PLATE RH

HINT:

Use the same procedure as for the LH side.