Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › 2011.10–2015.04
RM19V0EQ _59 Vehicle Exterior _014623 EXTERIOR PANELS / TRIM _0074268 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  REMOVAL  


PROCEDURE

Hide 52164A 1.REMOVE REAR BUMPER PLATE LH

a.
B280037
2.292,2.01 1.938,1.542 true 0.479,2.906 0.646,3.021 false 2.26,2.073 2.521,2.323 0.26,0.25 10 false *1 0.271,2.823 0.563,3.063 0.292,0.24 10 false *2
*1 Protective Tape
*2 Hook


Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws.

HINT:

Tape the screwdriver tip before use.



b.

Disengage the hook and remove the rear bumper plate LH.


Hide 52163A 2.REMOVE REAR BUMPER PLATE RH

HINT:

Use the same procedure as for the LH side.


Hide 3.REMOVE REAR BUMPER ASSEMBLY

a.
B280039
1.344,1.354 1.052,0.885 false 1.333,1.396 1.635,1.656 0.302,0.26 10 *1
*1 Protective Tape


Put protective tape around the rear bumper assembly.


b.
B280041

Using a clip remover, remove the 2 clips.


c.

Remove the 6 screws.


d.
B280040

Remove the 2 screws.

HINT:

Use the same procedure for the RH side and LH side.



e.
B280042

Disengage the 7 claws as shown in the illustration.

HINT:

Use the same procedure for the RH side and LH side.



f.
B280044

Disengage the 6 claws as shown in the illustration.


g.

w/ TOYOTA Parking Assist-sensor System:

i.

Disconnect the connector.



h.

Remove the rear bumper assembly.