Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE › 2011.10–2015.04
RM19V0EQ _59 Vehicle Exterior _014623 EXTERIOR PANELS / TRIM _0074271 NAME PLATE A

EXTERIOR PANELS / TRIM  NAME PLATE  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.


Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Name Plate or Emblem 20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the vehicle body, name plates or emblem excessively.


PROCEDURE

Hide 75431 1.INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM

a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Clean the luggage compartment door emblem. (If reusing the luggage compartment door emblem)

i.

Using a heat light, heat the luggage compartment door emblem.


ii.

Remove the double-sided tape from the luggage compartment door emblem.


iii.

Wipe off any tape adhesive residue with cleaner.


iv.

Apply new double-sided tape to the luggage compartment door emblem.



c.

Install the luggage compartment door emblem.

i.

Using a heat light, heat the vehicle body and luggage compartment door emblem.


ii.

Remove the release paper from the luggage compartment door emblem.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



iii.
B281357

Engage the 2 pins and install the luggage compartment door emblem as shown in the illustration.



Hide 75442 2.INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE

a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Clean the No. 2 luggage compartment door name plate. (If reusing the No. 2 luggage compartment door name plate)

i.

Using a heat light, heat the No. 2 luggage compartment door name plate.


ii.

Remove the double-sided tape from the No. 2 luggage compartment door name plate.


iii.

Wipe off any tape adhesive residue with cleaner.


iv.

Apply new double-sided tape to the No. 2 luggage compartment door name plate.



c.

Install the No. 2 luggage compartment door name plate.

i.

Using a heat light, heat the vehicle body and No. 2 luggage compartment door name plate.


ii.

Remove the release paper from the No. 2 luggage compartment door name plate.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 2 luggage compartment door name plate.

B293779
0.365,2.875 0.938,2.875 false 3.917,2.281 4.469,2.281 false 4.031,5.229 4.583,5.229 false 0.208,2.792 0.479,3.063 0.271,0.271 10 false *1 3.76,2.208 4.031,2.479 0.271,0.271 10 false *1 3.885,5.135 4.156,5.406 0.271,0.271 10 false *1 4.135,1.594 4.365,1.844 0.229,0.25 10 false A 5.115,1.01 5.344,1.26 0.229,0.25 10 false B 6.635,1.646 6.865,1.896 0.229,0.25 10 false C 4.177,4.458 4.406,4.708 0.229,0.25 10 false D 5.073,3.813 5.302,4.063 0.229,0.25 10 false E 6.698,4.469 6.927,4.719 0.229,0.25 10 false F
*1 Profile of Luggage Compartment Door Panel - -


Reference Measurement
Area Measurement Area Measurement
A 49.2 mm (1.94 in.) B 216.4 mm (8.52 in.)
C 49.2 mm (1.94 in.) D 49.2 mm (1.94 in.)
E 219.8 mm (8.65 in.) F 44.1 mm (1.74 in.)



Hide 75443A 3.INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE

a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Clean the No. 3 luggage compartment door plate. (If reusing the No. 3 luggage compartment door plate)

i.

Using a heat light, heat the No. 3 luggage compartment door plate.


ii.

Remove the double-sided tape from the No. 3 luggage compartment door plate.


iii.

Wipe off any tape adhesive residue with cleaner.


iv.

Apply new double-sided tape to the No. 3 luggage compartment door plate.



c.

Install the No. 3 luggage compartment door plate.

i.

Using a heat light, heat the vehicle body and No. 3 luggage compartment door plate.


ii.

Remove the release paper from the No. 3 luggage compartment door plate.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 3 luggage compartment door plate.

B293778
2.74,1.479 2.542,1.375 false 2.448,3.708 2.24,3.542 false 2.302,5.99 2.094,5.823 false 2.25,8.146 2.042,7.979 false 5.906,1.729 5.698,1.563 false 5.875,3.885 5.667,3.708 false 5.833,6.021 5.625,5.854 false 5.802,8.135 5.594,7.969 false 1.219,3.219 1.344,3.385 0.125,0.167 10 false A 2.146,2.448 2.271,2.615 0.125,0.167 10 false B 2.427,2.875 2.573,3.083 0.146,0.208 10 true C 1.25,5.281 1.375,5.448 0.125,0.167 10 false D 2.063,4.542 2.188,4.708 0.125,0.167 10 false E 2.427,4.969 2.573,5.177 0.146,0.208 10 true F 1.24,7.323 1.365,7.49 0.125,0.167 10 false G 2.042,6.635 2.167,6.802 0.125,0.167 10 false H 2.458,7.177 2.604,7.385 0.146,0.208 10 true I 4.417,1.75 4.563,1.948 0.146,0.198 10 false J 5.479,0.344 5.604,0.51 0.125,0.167 10 false K 5.958,0.792 6.135,1.01 0.177,0.219 10 true L 4.406,3.719 4.594,3.885 0.188,0.167 10 false M 5.5,2.417 5.625,2.583 0.125,0.167 10 false N 6.01,2.979 6.229,3.188 0.219,0.208 10 true O 4.417,5.885 4.542,6.052 0.125,0.167 10 false P 5.427,4.552 5.552,4.719 0.125,0.167 10 false Q 6.073,5.063 6.281,5.25 0.208,0.188 10 true R 4.417,8 4.542,8.167 0.125,0.167 10 false S 5.479,6.625 5.604,6.792 0.125,0.167 10 false T 6.063,7.177 6.177,7.375 0.115,0.198 10 true U 2.76,1.406 3.115,1.656 0.354,0.25 10 false *1 2.469,3.656 2.823,3.906 0.354,0.25 10 false *1 2.323,5.917 2.542,6.135 0.219,0.219 10 false *1 2.271,8.083 2.49,8.302 0.219,0.219 10 false *1 5.938,1.667 6.156,1.885 0.219,0.219 10 false *1 5.906,3.833 6.313,4.177 0.406,0.344 10 false *1 5.854,5.948 6.073,6.167 0.219,0.219 10 false *1 5.813,8.094 6.031,8.313 0.219,0.219 10 false *1
*1 Profile of Luggage Compartment Door Panel - -


Reference Measurement
Area Measurement Area Measurement
A 45.2 mm (1.78 in.) B 184.0 mm (7.24 in.)
C 45.8 mm (1.80 in.) D 46.0 mm (1.81 in.)
E 161.6 mm (6.36 in.) F 47.9 mm (1.89 in.)
G 45.2 mm (1.78 in.) H 171.9 mm (6.77 in.)
I 48.0 mm (1.89 in.) J 154.2 mm (6.07 in.)
K 206.0 mm (8.11 in.) L 48.4 mm (1.91 in.)
M 153.8 mm (6.06 in.) N 202.3 mm (7.96 in.)
O 48.7 mm (1.92 in.) P 151.6 mm (5.97 in.)
Q 219.9 mm (8.66 in.) R 53.2 mm (2.09 in.)
S 151.2 mm (5.95 in.) T 219.9 mm (8.66 in.)
U 53.4 mm (2.10 in.) - -