Home › Drivetrain › U760E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSAXLE SYSTEM
RM19V0EQ _52 Drivetrain _014582 U760E AUTOMATIC TRANSMISSION / TRANSAXLE _0076198 AUTOMATIC TRANSAXLE SYSTEM U

U760E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  TERMINALS OF ECM  


ECM


C239275
2.453,0.355 2.85,0.593 0.397,0.238 2.532,0.401 2.807,0.583 0.275,0.182 10 E26 5.894,0.383 6.291,0.621 0.397,0.238 5.975,0.435 6.253,0.617 0.278,0.182 10 A25

HINT:

The standard voltage between each pair of ECM terminals is shown in the table below. The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard voltage for that pair of terminals, displayed in the "Specified Condition" column. The illustration above can be used as a reference to identify the ECM terminal locations.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
E26-3 (SL) - E26-16 (E1) R - BR Shift solenoid valve (SL) signal All gears
(Lock-up on / Flex lock-up on)
11 to 14 V
E26-5 (SL1+) - E26-4 (SL1-) V - B Shift solenoid valve (SL1) signal 1st, 2nd, 3rd or 4th gear Pulse generation
E26-7 (SLU+) - E26-6 (SLU-) L - G Shift solenoid valve (SLU) signal All gears
(Lock-up on / Flex lock-up on)
Pulse generation
E26-9 (SL4+) - E26-8 (SL4-) V - W Shift solenoid valve (SL4) signal 3rd or 5th gear Pulse generation
E26-11 (SL3+) - E26-10 (SL3-) L - P Shift solenoid valve (SL3) signal 2nd or 6th gear Pulse generation
E26-13 (SL2+) - E26-12 (SL2-) LG - GR Shift solenoid valve (SL2) signal 4th, 5th or 6th gear Pulse generation
E26-15 (SLT+) - E26-14 (SLT-) W - Y Shift solenoid valve (SLT) signal Engine idling Pulse generation
E26-63 (NSW) - E26-16 (E1) LG - BR Park/neutral position switch assembly signal Ignition switch ON and shift lever in P or N Below 2 V
Ignition switch ON and shift lever not in P or N 11 to 14 V
E26-66 (R) - E26-16 (E1) GR - BR R shift position switch signal Ignition switch ON and shift lever in R 11 to 14 V
Ignition switch ON and shift lever not in R Below 1 V
E26-67 (D) - E26-16 (E1) G - BR D shift position switch signal Ignition switch ON and shift lever in D or S 11 to 14 V
Ignition switch ON and shift lever not in D or S Below 1 V
E26-70 (P) - E26-16 (E1) B - BR P shift position switch signal Ignition switch ON and shift lever in P 11 to 14 V
Ignition switch ON and shift lever not in P Below 1 V
E26-71 (N) - E26-16 (E1) L - BR N shift position switch signal Ignition switch ON and shift lever in N 11 to 14 V
Ignition switch ON and shift lever not in N Below 1 V
E26-116 (NTB) - E26-16 (E1) B - BR Power source for sensor (fixed voltage) Ignition switch ON 11 to 14 V
E26-115 (NTO) - E26-16 (E1) R - BR Speed sensor (NT) signal Engine idle speed Pulse generation
E26-118 (NCB) - E26-16 (E1) LG - BR Power source for sensor (fixed voltage) Ignition switch ON 11 to 14 V
E26-117 (NCO) - E26-16 (E1) W - BR Speed sensor (NC) signal Vehicle driving Pulse generation
E26-120 (THO1) - E26-119 (ETHO) LG - P ATF temperature sensor signal ATF temperature: 115°C (239°F) or more Below 1.5 V
A25-27 (S) - E26-16 (E1) G - BR S shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever not in S Below 1 V
A25-42 (SFTU) - E26-16 (E1) R - BR Up shift switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "+" (Up shift) Below 1 V
A25-43 (SFTD) - E26-16 (E1) V - BR Down shift switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "-" (Down shift) Below 1 V