Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VEHICLE STABILITY CONTROL SYSTEM
RM19V0EQ _54 Brake _014591 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0076219 VEHICLE STABILITY CONTROL SYSTEM C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VEHICLE STABILITY CONTROL SYSTEM  C1201  Engine Control System Malfunction  


DESCRIPTION

If a malfunction in the SFI system is detected, the operation of VSC and TRC is prohibited by the fail-safe function. When the signals from the engine are received normally, fail-safe control is canceled.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1201 Engine Control System Malfunction Engine control system malfunction signal continues for 2.5 seconds. SFI system

PROCEDURE

1.CHECK SFI SYSTEM
a.

Check if an SFI system DTC is output.

Click hereEngine / Hybrid System>2AR-FE ENGINE CONTROL>SFI SYSTEM>DTC CHECK / CLEAR

Powertrain > Engine > Trouble Codes
50001 234
Result:
Result Proceed to
DTC is not output. A
DTC is output. B


HINT:

If troubleshooting has been carried out according to Problem Symptoms Table, refer back to the table and proceed to the next step before replacing parts.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>PROBLEM SYMPTOMS TABLE




A

B