Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM › 2011.10–2013.07
RM19V0EQ _51 Engine / Hybrid System _014581 CRUISE CONTROL _0073970 CRUISE CONTROL SYSTEM U

CRUISE CONTROL  CRUISE CONTROL SYSTEM  TERMINALS OF ECM  


CHECK ECM


A247842
2.488,0.449 2.757,0.608 0.269,0.159 10 E26 5.896,0.449 6.194,0.608 0.299,0.159 10 A25 2.402,0.362 2.809,0.679 0.406,0.318 5.814,0.361 6.22,0.679 0.406,0.318

Terminal No. (Symbols) Wiring Color Terminal Description Condition Specified Condition
A25-23 (TC) - E26-16 (E1) P - BR Connected to terminal TC of DLC3 Ignition switch ON 11 to 14 V
A25-23 (TC) - E26-16 (E1) P - BR Connected to terminal TC of DLC3 Terminals TC and CG of DLC3 connected Below 1 V
A25-11 (STP) - E26-16 (E1) BE - BR Stop light signal Ignition switch ON, Brake pedal depressed 11 to 14 V
A25-11 (STP) - E26-16 (E1) BE - BR Stop light signal Ignition switch ON, Brake pedal released Below 1 V
A25-40 (CCS) - E26-16 (E1) W - BR Cruise control switch circuit Cruise control switch OFF 1 MΩ or higher
A25-40 (CCS) - E26-16 (E1) W - BR Cruise control switch circuit Cruise control switch ON Below 2.5 Ω
A25-40 (CCS) - E26-16 (E1) W - BR Cruise control switch circuit +/RES switch ON 235 to 245 Ω
A25-40 (CCS) - E26-16 (E1) W - BR Cruise control switch circuit -/SET switch ON 617 to 643 Ω
A25-40 (CCS) - E26-16 (E1) W - BR Cruise control switch circuit CANCEL switch ON 1509 to 1571 Ω
A25-24 (ST1-) - E26-16 (E1) GR - BR Stop light signal Ignition switch ON, Brake pedal depressed Below 1 V
A25-24 (ST1-) - E26-16 (E1) GR - BR Stop light signal Ignition switch ON,
Brake pedal released
11 to 14 V
E26-67 (D)*1 - E26-16 (E1) G - BR Clutch signal Ignition switch ON, Clutch pedal depressed Below 1 V
E26-67 (D)*1 - E26-16 (E1) G - BR Clutch signal Ignition switch ON, Clutch pedal released 11 to 14 V
E26-67 (D)*2 - E26-16 (E1) G - BR D shift position signal Ignition switch ON,
Shift lever D or S position
11 to 14 V
E26-67 (D)*2 - E26-16 (E1) G - BR D shift position signal Ignition switch ON,
Shift lever except D or S position
Below 1 V
A25-43 (SFTD)*2 - E26-16 (E1) V - BR Down shift switch signal Ignition switch ON and shift lever S position 11 to 14 V
Ignition switch ON and shift lever "-" position (Down shift) Below 1 V
A25-42 (SFTU)*2 - E26-16 (E1) R - BR Up shift switch signal Ignition switch ON and shift lever S position 11 to 14 V
Ignition switch ON and shift lever "+" position (Up shift) Below 1 V

*1: for Manual Transaxle

*2: for Automatic Transaxle