Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) › 2011.10–2016.05
RM19V0EQ _58 Vehicle Interior _014613 HEATING / AIR CONDITIONING _0074198 AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) W

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Manual Air Conditioning System)  CUSTOMIZE PARAMETERS  


CUSTOMIZE AIR CONDITIONING SYSTEM (for Manual Air Conditioning System)


a.

Customizing with the intelligent tester

HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



i.

Connect the intelligent tester.


ii.

Turn the ignition switch to ON.


iii.

Turn the intelligent tester on.


iv.

Enter the following menus: Body / Air Conditioner / Utility / Customize.


v.

Select the setting by referring to the table below.

Air Conditioner
Tester Display Description Default Setting ECU
Evaporator Control Function to set the evaporator control to the AUTOMATIC position (AUTO) to save power or to the coldest position (MANUAL) to dehumidify the air and to prevent the windows from fogging up. Automatic 0:Automatic,1:Manual Air Conditioning Amplifier Assembly
Refrigerant Shortage Check Function to cancel the refrigerant shortage check (check performed during normal operation) when item is OFF. ON 0:ON,1:OFF Air Conditioning Amplifier Assembly
50006 11