Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM › 2011.10–2015.04
RM19V0EQ _59 Vehicle Exterior _014621 LIGHTING (EXT) _0074248 LIGHTING SYSTEM W

LIGHTING (EXT)  LIGHTING SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE LIGHTING SYSTEM (EXT)


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the intelligent tester

i.

Connect the intelligent tester to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the intelligent tester on.


iv.

Enter the following menus: Body / Main Body / Utility / Customize / Light Control.


v.

Select the setting by referring to the table below.

Light Control
Tester Display Description Default Setting ECU
Response Time Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position NORMAL 0:Normal,1:Long Main Body ECU (Multiplex Network Body ECU)
Disp Ex ON Sen Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A NORMAL 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main Body ECU (Multiplex Network Body ECU)
Disp Ex OFF Sen Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B NORMAL 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main Body ECU (Multiplex Network Body ECU)
Sensitivity Adjusts the sensitivity of the automatic light control system.*C NORMAL 000:Normal,001:Dark2,010:Dark1,011:Light1,100:Light2 Main Body ECU (Multiplex Network Body ECU)
50006 8
HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.


*A

E259624E12
0.375,0.333 2.292,0.708 1.917,0.375 10 Brightness level required to dim the lights 2.771,0.542 3.385,0.74 0.615,0.198 10 Dark 6.281,0.542 6.896,0.74 0.615,0.198 10 Bright 1.083,1.104 1.729,1.333 0.646,0.229 10 Setting 2.667,1.104 3.313,1.333 0.646,0.229 10 Dark2 3.521,1.104 4.167,1.333 0.646,0.229 10 Dark1 4.406,1.104 5.083,1.333 0.677,0.229 10 Normal 5.333,1.104 6.01,1.333 0.677,0.229 10 Light1 6.177,1.104 6.76,1.313 0.583,0.208 10 Light2

*B

E259624E11
0.333,0.302 2.406,0.688 2.073,0.385 10 Brightness level required to cancel the dimming of the lights 1.104,1.094 2,1.365 0.896,0.271 10 Setting 2.781,0.531 3.333,0.781 0.552,0.25 10 Dark 6.313,0.542 6.865,0.792 0.552,0.25 10 Bright 2.688,1.115 3.24,1.365 0.552,0.25 10 Dark2 3.573,1.115 4.125,1.365 0.552,0.25 10 Dark1 4.396,1.115 5.042,1.344 0.646,0.229 10 Normal 6.229,1.115 6.781,1.365 0.552,0.25 10 Light2 5.344,1.115 5.896,1.365 0.552,0.25 10 Light1

*C

E259624E03
0.365,0.302 2.354,0.708 1.99,0.406 10 Sensitivity of the automatic light control system 1.104,1.094 2,1.365 0.896,0.271 10 Setting 2.781,0.531 3.333,0.781 0.552,0.25 10 Dark 6.313,0.542 6.865,0.792 0.552,0.25 10 Bright 2.719,1.115 3.271,1.365 0.552,0.25 10 Dark2 3.615,1.115 4.167,1.365 0.552,0.25 10 Dark1 4.469,1.115 5.021,1.365 0.552,0.25 10 Normal 6.271,1.115 6.823,1.365 0.552,0.25 10 Light2 5.375,1.115 5.927,1.365 0.552,0.25 10 Light1




b.

Customizing with Multi-display (w/ Navigation System)

i.

Turn the ignition switch to ON.


ii.

Enter the following menus: SETUP / Vehicle / Vehicle Customization / Light Settings.


iii.

Select the setting by referring to the table below.

Light Settings
Display Default Content Setting Relevant ECU
Light sensor sensitivity 0 Adjusts the sensitivity of the automatic light control system.*A -2, -1, 0, 1 or 2 Main Body ECU (Multiplex Network Body ECU)

HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.


*A

E259624E14
0.365,0.302 2.313,0.708 1.948,0.406 10 false Sensitivity of the automatic light control system 1.104,1.094 2,1.365 0.896,0.271 10 false Setting 2.781,0.531 3.333,0.781 0.552,0.25 10 false Dark 6.313,0.542 6.865,0.792 0.552,0.25 10 false Bright 2.813,1.115 3.115,1.333 0.302,0.219 10 false -2 3.708,1.115 4.052,1.344 0.344,0.229 10 false -1 4.635,1.115 5.031,1.344 0.396,0.229 10 false 0 6.438,1.115 6.844,1.333 0.406,0.219 10 false 2 5.521,1.115 5.948,1.365 0.427,0.25 10 false 1




c.

Customizing with Radio and Display Receiver Assembly (w/ Audio and Visual System (for Radio and Display Type))

i.

Turn the ignition switch to ON.


ii.

Enter the following menus: SETUP / Vehicle.


iii.

Select the setting by referring to the table below.

Vehicle Settings
Display Default Content Setting Relevant ECU
Light sensor sensitivity 0 Adjusts the sensitivity of the automatic light control system.*A -2, -1, 0, 1 or 2 Main Body ECU (Multiplex Network Body ECU)

HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.


*A

E259624E14
0.365,0.302 2.313,0.708 1.948,0.406 10 false Sensitivity of the automatic light control system 1.104,1.094 2,1.365 0.896,0.271 10 false Setting 2.781,0.531 3.333,0.781 0.552,0.25 10 false Dark 6.313,0.542 6.865,0.792 0.552,0.25 10 false Bright 2.813,1.115 3.115,1.333 0.302,0.219 10 false -2 3.708,1.115 4.052,1.344 0.344,0.229 10 false -1 4.635,1.115 5.031,1.344 0.396,0.229 10 false 0 6.438,1.115 6.844,1.333 0.406,0.219 10 false 2 5.521,1.115 5.948,1.365 0.427,0.25 10 false 1