Home › Vehicle Interior › INTERIOR PANELS / TRIM › REAR SUNSHADE SYSTEM
RM19V0EQ _58 Vehicle Interior _014615 INTERIOR PANELS / TRIM _0074206 REAR SUNSHADE SYSTEM W

INTERIOR PANELS / TRIM  REAR SUNSHADE SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE REAR SUNSHADE SYSTEM


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Record the current settings before customizing.



a.

Customizing with the intelligent tester

i.

Connect the intelligent tester to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the intelligent tester on.


iv.

Enter the following menus: Body / Main Body / Utility / Customize / Others.


v.

Select the setting by referring to the table below.

Others
Tester Display Description Default Setting ECU
Rear Shade Delay Time Function to change the time lag of the shift-linked operation 0.7 s 00:0.7 s,10:0.9 s,01:1.2 s,11:0.0 s Main body ECU (Multiplex network body ECU)
R-pos to Rear Sun Shade COM Function to lower the rear sunshade when the shift lever is moved to R with the rear sunshade raised ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
50006 98