Home › General › SPECIFICATIONS › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › from 2015.04
RM19V0EQ _V1 General _014571 SPECIFICATIONS _0073875 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS F

SPECIFICATIONS  BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  SERVICE DATA  


VSC OFF Switch (for LHD)
Tester Connection Switch Condition Specified Condition
9 (+) - 6 (E) Switch pushed Below 1 Ω
9 (+) - 6 (E) Switch not pushed 10 kΩ or higher

VSC OFF Switch (for RHD)
Tester Connection Switch Condition Specified Condition
9 (+) - 6 (E) Switch pushed Below 1 Ω
9 (+) - 6 (E) Switch not pushed 10 kΩ or higher

Brake Pedal Load Sensing Switch
Tester Connection Switch Condition Specified Condition
2 (FSW+) - 1 (FSW-) Switch OFF (Brake pedal depressed) 950 to 1050 Ω
2 (FSW+) - 1 (FSW-) Switch ON (Brake pedal released) 203 to 223 Ω

Relay
Tester Connection Condition Specified Condition
3 - 4 Voltage is not applied between terminals 1 and 2 Below 1 Ω
3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
3 - 4 Voltage is applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω