Home › Brake › BRAKE (FRONT) › FRONT BRAKE › from 2015.04
RM19V0EQ _54 Brake _014593 BRAKE (FRONT) _0074048 FRONT BRAKE A

BRAKE (FRONT)  FRONT BRAKE  DISASSEMBLY  


PROCEDURE

Hide 47731 1.REMOVE FRONT DISC BRAKE PISTON

a.

Place a piece of cloth between the front disc brake piston and front disc brake cylinder assembly.


b.
C246356

Apply compressed air to remove the front disc brake piston from the front disc brake cylinder assembly.

CAUTION:

Do not place your fingers in front of the front disc brake piston when using compressed air.


NOTICE:

Do not allow any brake fluid to spatter.



Hide 2.REMOVE CYLINDER BOOT

a.

Remove the cylinder boot from the disc brake cylinder assembly.


Hide 3.REMOVE PISTON SEAL

a.
C143464C01
0.894,0.454 1.048,0.602 0.155,0.148 10 *1 1.382,0.538 1.064,0.538 false
*1 Vinyl Tape


Using a screwdriver with its tip wrapped with vinyl tape, remove the piston seal from the front disc brake cylinder.

NOTICE:

Do not damage the inner surface or piston seal groove of the front disc brake cylinder.



Hide 31478B 4.REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

Hide 47547B 5.REMOVE FRONT DISC BRAKE BLEEDER PLUG