Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM › from 2015.04
RM19V0EQ _51 Engine / Hybrid System _014581 CRUISE CONTROL _0163372 LANE DEPARTURE ALERT SYSTEM U

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM  TERMINALS OF ECU  


CHECK LANE DEPARTURE WARNING CAMERA


E256359E18
1.896,0.781 2.271,1.031 0.375,0.25 1.969,0.823 2.281,1.021 0.313,0.198 10 false S14

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
S14-4 (LKSW) - S14-11 (GND) R - BR Lane-keeping assist main switch signal Engine switch on (IG), lane-keeping assist main switch off 4 V or higher
S14-4 (LKSW) - S14-11 (GND) R - BR Lane-keeping assist main switch signal Engine switch on (IG), lane-keeping assist main switch on Below 1 V
S14-6 (CA1P) - S14-11 (GND) V - BR CAN communication signal Engine switch on (IG) Pulse generation
(Waveform 1)
S14-7 (IGB) - S14-11 (GND) GR - BR Power source Engine switch on (IG) 11 to 14 V
S14-11 (GND) - Body ground BR - Body ground Ground Always Below 1 Ω
S14-12 (CA1N) - S14-11 (GND) LG - BR CAN communication signal Engine switch on (IG) Pulse generation(Waveform 1)

If the result is not as specified, there may be a malfunction on the wire harness side.

HINT:

Oscilloscope waveform samples are provided here for reference only. Noise and fluctuating waveforms have been omitted.


a.
A111598E09
2.833,1.281 2.698,1.281 false 2.823,1.646 2.688,1.646 false 2.875,1.208 3.229,1.365 0.354,0.156 10 false GND 2.875,1.583 3.229,1.74 0.354,0.156 10 false GND 0.229,0.656 0.552,0.823 0.323,0.167 10 false CH1 0.229,1.323 0.552,1.49 0.323,0.167 10 false CH2

Waveform 1 (CAN communication signal)

Item Content
Terminal Name CH1: S14-6 (CA1P) - S14-11 (GND)
CH2: S14-12 (CA1N) - S14-11 (GND)
Tester Range 1 V/DIV., 50 μs./DIV.
Condition Engine switch on (IG)

HINT:

The waveform will vary depending on the content of the digital communication (digital signal).