Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › from 2015.04
RM19V0EQ _51 Engine / Hybrid System _014581 CRUISE CONTROL _0163371 DYNAMIC RADAR CRUISE CONTROL SYSTEM C

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  P1578  Brake System Malfunction  


DESCRIPTION

This DTC is stored when the VSC system has a problem. Check the VSC system when this DTC is output.

DTC No. Detection Item DTC Detection Condition Trouble Area
P1578 Brake System Malfunction The ECM receives a brake system error signal for approximately 0.2 seconds or more while the dynamic radar cruise control is operating.
·

VSC system

·

ECM



WIRING DIAGRAM

E230248E47
0.844,2.271 2.594,2.625 1.75,0.354 10 false : CAN Communication Line 1.01,1.906 3.865,2.115 2.854,0.208 10 false Skid Control ECU (Brake Actuator Assembly) 1.01,1.729 1.385,1.948 0.375,0.219 10 false A49 5.26,1.75 5.656,1.948 0.396,0.198 10 false A25 4.917,0.698 5.354,0.875 0.438,0.177 10 false CANH 4.927,1.198 5.365,1.417 0.438,0.219 10 false CANL 2.104,0.677 2.542,0.906 0.438,0.229 10 false CANH 2.104,1.188 2.542,1.417 0.438,0.229 10 false CANL 2.615,0.49 2.938,0.76 0.323,0.271 10 false 25 4.667,0.5 4.875,0.708 0.208,0.208 10 false 13 4.667,1.021 4.875,1.219 0.208,0.198 10 false 26 2.615,1.01 2.906,1.229 0.292,0.219 10 false 14 5.26,1.938 5.844,2.219 0.583,0.281 10 false ECM

CAUTION / NOTICE / HINT

HINT:

This circuit uses CAN communication. Therefore, if there are any malfunctions in the communication circuit, one or more CAN communication system DTCs are stored.


PROCEDURE

1.CHECK FOR DTCS (ABS/VSC/TRC)
a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.


e.

Check for DTCs.

Chassis > ABS/VSC/TRC > Trouble Codes
50001 105

f.

Turn the engine switch off.


Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

B