87810
1.REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)
Disengage the 2 claws and disconnect the inner mirror base cover.
| *a | Lock Lever |
Pull the lock lever in the direction indicated by the arrow (1) in the illustration, and slide the inner rear view mirror assembly upward to remove it.
87834
2.REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)
w/o Lane Departure Alert System:
Disengage the 2 claws and slide the inner rear view mirror stay holder cover as shown in the illustration.
Disengage the 6 claws and remove the inner rear view mirror stay holder cover.
86466C
3.REMOVE NO. 2 LANE DEPARTURE WARNING CAMERA COVER (w/ EC Mirror)
w/Lane Departure Alert System:
Click hereEngine / Hybrid System>CRUISE CONTROL>LANE RECOGNITION CAMERA SENSOR>REMOVAL
86466
4.REMOVE NO. 1 LANE DEPARTURE WARNING CAMERA COVER (w/ EC Mirror)
w/Lane Departure Alert System:
Click hereEngine / Hybrid System>CRUISE CONTROL>LANE RECOGNITION CAMERA SENSOR>REMOVAL
87810
5.REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)
Disconnect the connector.
Using a T20 "TORX" socket wrench, remove the screw and inner rear view mirror assembly.