BLIND SPOT MONITOR SENSOR RH
| Terminal No.
(Symbol) |
Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| O32-4 (OMIR) - O32-10 (BRGD) | G - BR | Outer rear view mirror indicator power source signal RH | Outer rear view mirror indicator RH illuminated | 2.5 to 7.5 V |
| Outer rear view mirror indicator RH blinks | Alternating between 0 to 7.5 V | |||
| Outer rear view mirror indicator RH not illuminated | Below 1 V | |||
| O32-5 (BRB) - O32-10 (BRGD) | L - BR | IG power source signal | Engine switch off | Below 1 V |
| Engine switch on (IG) | 11 to 14 V | |||
| O32-8 (BSSW) - O32-10 (BRGD) | GR - BR | Blind spot monitor main switch (warning canceling switch assembly) power source signal | Engine switch on (IG), blind spot monitor main switch (warning canceling switch assembly) on | 11 to 14 V |
| O32-8 (BSSW) - O32-10 (BRGD) | Engine switch on (IG), blind spot monitor main switch (warning canceling switch assembly) off | Below 1 V | ||
| O32-10 (BRGD) - Body Ground | BR - Body ground | Ground | Always | Below 1 V |
BLIND SPOT MONITOR SENSOR LH
| Terminal No.
(Symbol) |
Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| T21-3 (BUZ) - T21-10(BLGD) | B - BR | RCTA buzzer (blind spot monitor buzzer) operation signal | RCTA buzzer (blind spot monitor buzzer) not sounding | 11 to 14 V |
| RCTA buzzer (blind spot monitor buzzer) sounding | Alternating between 0 to 14 V | |||
| T21-4 (OMIL) - T21-10 (BLGD) | G - BR | Outer rear view mirror indicator power source signal LH | Outer rear view mirror indicator LH illuminated | 2.5 to 7.5 V |
| Outer rear view mirror indicator LH blinks | Alternating between 0 to 7.5 V | |||
| Outer rear view mirror indicator LH not illuminated | Below 1 V | |||
| T21-5 (BLB) - T21-10 (BLGD) | L - BR | IG power source signal | Engine switch off | Below 1 V |
| Engine switch on (IG) | 11 to 14 V | |||
| T21-10 (BLGD) - Body Ground | BR - Body ground | Ground | Always | Below 1 V |